Categories Blog press brake laser cutting machine punching machine shearing machine punching and shearing machine New Blog Advantages and Operation rules of hydraulic ironworker punching machine Classification and Use of Shearing Machine Attention for Safe debugging of CNC Hydraulic Press Brake Machine Molds Some common sense of CNC shearing machine Usage of CNC bending machine Tags Hydraulic press brake machine Hydraulic press brake CNC hydraulic press brake Fiber Laser cutting machine Laser cutting machine matters Tube plate laser cutting machine matters Laser cutting machine Fiber plate metal laser cutting machine Whole cover fiber laser cutting machine Plate shearing machine Attention For Safe Debugging Of CNC Hydraulic Press Brake Machine Molds

The hydraulic press brake machine mold is composed of many parts, so the state of the equipment must be checked during installation, and strictly follow the steps. At the same time, pay attention to safety during installation and commissioning, so the CNC hydraulic press brake machine mold is installed The steps of debugging are critical.

Installation and debugging process of CNC hydraulic press brake machine mold:

1. Before adjusting the machine, you must first adjust the performance of the machine. This process must be carried out patiently and carefully, check whether the machine is dusty and used iron debris, etc., perform the necessary cleaning to reduce Later troubles.

2. The adjustment of the stroke of the slider, pay attention to check the thickness of the mold and check whether the ratio of the upper and lower modules is normal. Normally, the module should be controlled at the switching point of the stroke line. This must be paid attention to.

3. The adjustment of the travel module is to adjust the upper limit point of the module. When the module reaches the highest point, set the switch, and reserve the position where the slider stays, and also decelerate when descending. Modules to better protect machines and molds.

4. The adjustment of the gap is mainly to measure the distance between the upper module and the lower module first, and the specific gap is determined according to the folded sheet.

5. Angle adjustment. This angle adjustment has a certain relationship with the product. Generally speaking, the 90°mold is folded, then the middle angle must be greater than the angle on both sides, then its tightness can be adjusted according to the adjustment screw. Can adjust the pressure through the pressure gauge to avoid mold breakage.