Low Temperature Chiller R507C & R404A AC-40L


Specification
                                              Model
Item
AC-40L
Nominal cooling capacity
50hz
18.45
60hz
22.14
input power
kw
36
power supply
3PH~380V/415V/460V  50HZ/60HZ
refrigerant
type
R507/R404A
type of control
Expansion valve
compressor
type
hermetic scroll
power(kw)
30
condenser
type
finned copper tube + low noise outer rotor fan
evaporator
type
Shell & tube / Plate heat exchanger (Optional)
Chilled water flow
8.92(50hz）
10.70(60hz）
inlet and outlet pipe diameter (inch)
2-1/2
water pump
power (kw)
4
lift (m)
20
safety protection
compressor overheating protection, over-current protection, high and low pressure,over-temperature protection, flow switch protection,phase sequence or missing phase protection, exhaust overheating protection
weight
kg
1125
dimension
mm
2500*1200*2250
Note: 1. Nominal cooling capacity is according to:
            Inlet/ Outlet chilled fluid temperature:-20℃—-25℃
            Inlet/ Outlet cooling air temperature: 30℃—35℃

    2. Working range:
            The temperature range of chilled fluid is from  from -20℃ to -25℃ ;
            Temperature difference between inlet and outlet chilled fluid is from 3℃ to 8℃.
            It is better to use the chiller while the ambient temperature at or below 35℃.
We reserve the right to modify the above dimensions or parameters without further notice.

We are a professional chiller manufacturer, the main products include: environment-friendly chiller, screw chiller, low temperature chiller,oil chiller, heat-cold dual temperature controller, laser chiller, PCB dedicated chiller and other series of chiller, more than thousands of varieties. 

评论

发表评论

此博客中的热门博文

Waterproofing and moisture transmission technology and testing standards for textiles

图片
With the development of textile processing technology,  textile products  with certain functions emerge constantly. Waterproof textiles or waterproof textiles  that have the functions of moisture permeability, air permeability and heat preservation at the same time have been applied more and more in outdoor emergency clothing, fire protection clothing, canopies and medical protective clothing and other products.At present, there are many processing technologies for waterproof and moisture-permeable textile materials. The products produced by different finishing technologies have different waterproof and moisture-permeable effects. There are many testing methods to determine the waterproof performance of textiles at home and abroad, but they are mainly divided into two aspects. One is to determine the surface resistance of textiles to be wetted by water, and the other is to determine the resistance of textiles to water penetration.There are ISO, EN, AATCC, JIS, GB and o...
阅读全文

Knowledge of 45 Degree Automatic Flammability Tester

图片
Horizontal and vertical combustion tester  is used to simulate the early situation of fire in the surrounding environment of electrical and electronic products. It is used to simulate the technology to assess the risk of fire, so as to ensure that the fire around the products will not cause combustion spread.The test equipment is suitable for the parts, parts and components of the electrical appliances, such as the insulation shell, switch panel, printed circuit board and insulation material of the electrical appliances.This model ul94 horizontal and vertical combustion test instrument is designed to test the combustible performance of equipment and appliance parts and materials. Many end-use test indexes, such as inflammability, combustion rate, flame spread, combustion intensity and flame retardant performance of the product, can be tested. 45 Degree Automatic Flammability Tester : used for the determination of flame retardant properties of clothing fabrics, decorative fabri...
阅读全文

YFL Ceramic Ball Valve Operation, Installation and Maintenance Manual

图片
  YFL  Ceramic Ball valves   are widely used in abrasive and corrosive working conditions in Mining, Power, Metallurgy and Petrochemical etc.   The Operation, Installation and Maintenance Manual are as follows: Part I Storage 1、 YFL Ceramic ball valves  should be stored in doors away from vibration and/or mechanical shock and both of the ends must be sealed tightly. 2、When transit, please handle the ceramic ball valves with care and avoid any sudden shock or dropping. 3、After a long period of storage, it is recommended to clean the ceramic ball valves before installing, and make sure that they are flexible to open and close. Part II Installation and Operation 1、Before installation, please ensure all relevant equipment are effective 2、Do not handle the valve roughly when transit.  Sudden shock or dropping of the ceramic ball valves may cause damage. 3、While assembling, please check that the flanges are properly aligned to ensure gasket contact evenly. Assemb...
阅读全文